Remote Desktop settings in Windows 10. Microsoft disabled the tool on Windows 10 Home but did not remove it entirely. With a workaround, you can still enable the premium feature reserved for Windows Pro users without buying an expensive license of Windows 10 Pro. In that case, you can turn to a built-in Windows 10 tool called Quick Assist. Through Quick Assist, which requires permission from a person at the remote PC, you can opt to either view the screen.

-->

Applies To: Windows Server (Semi-Annual Channel), Windows Server 2016

This topic describes how to configure the client and server settings that are required for remote management of DirectAccess clients. Before you begin the deployment steps, ensure that you have completed the planning steps that are described in Step 2 Plan the Remote Access Deployment.

Task	Description
Install the Remote Access role	Install the Remote Access role.
Configure the deployment type	Configure the deployment type as DirectAccess and VPN, DirectAccess only, or VPN only.
Configure DirectAccess clients	Configure the Remote Access server with the security groups that contain DirectAccess clients.
Configure the Remote Access server	Configure the Remote Access server settings.
Configure the infrastructure servers	Configure the infrastructure servers that are used in the organization.
Configure application servers	Configure the application servers to require authentication and encryption.
Configuration summary and alternate GPOs	View the Remote Access configuration summary, and modify the GPOs if desired.

Note

This topic includes sample Windows PowerShell cmdlets that you can use to automate some of the procedures described. For more information, see Using Cmdlets.

Install the Remote Access role

You must install the Remote Access role on a server in your organization that will act as the Remote Access server.

To install the Remote Access role

To install the Remote Access role on DirectAccess servers

1. On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.

2. Click Next three times to get to the server role selection screen.

3. On the Select Server Roles dialog, select Remote Access, and then click Next.

4. Click Next three times.

5. On the Select role services dialog, select DirectAccess and VPN (RAS) and then click Add Features.

6. Select Routing, select Web Application Proxy, click Add Features, and then click Next.

7. Click Next, and then click Install.

8. On the Installation progress dialog, verify that the installation was successful, and then click Close.

Windows PowerShell equivalent commands

The following Windows PowerShell cmdlet or cmdlets perform the same function as the preceding procedure. Enter each cmdlet on a single line, even though they may appear word-wrapped across several lines here because of formatting constraints.

Microsoft Remote Access For Windows 10

Configure the deployment type

There are three options that you can use to deploy Remote Access from the Remote Access Management console:

• DirectAccess and VPN

• DirectAccess only

• VPN only

Note

This guide uses the DirectAccess only method of deployment in the example procedures.

To configure the deployment type

1. On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

2. In the Remote Access Management Console, in the middle pane, click Run the Remote Access Setup Wizard.

3. In the Configure Remote Access dialog box, select DirectAccess and VPN, DirectAccess only, or VPN only.

Configure DirectAccess clients

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group. After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

To configure DirectAccess clients

1. In the middle pane of the Remote Access Management console, in the Step 1 Remote Clients area, click Configure.

2. In the DirectAccess Client Setup Wizard, on the Deployment Scenario page, click Deploy DirectAccess for remote management only, and then click Next.

3. On the Select Groups page, click Add.

4. In the Select Groups dialog box, select the security groups that contain the DirectAccess client computers, and then click Next.

5. On the Network Connectivity Assistant page:

   • In the table, add the resources that will be used to determine connectivity to the internal network. A default web probe is created automatically if no other resources are configured. When configuring the web probe locations for determining connectivity to the enterprise network, ensure that you have at least one HTTP based probe configured. Configuring only a ping probe is not sufficient, and it could lead to an inaccurate determination of connectivity status. This is because ping is exempted from IPsec. As a result, ping does not ensure that the IPsec tunnels are properly established.

   • Add a Help Desk email address to allow users to send information if they experience connectivity issues.

   • Provide a friendly name for the DirectAccess connection.

   • Select the Allow DirectAccess clients to use local name resolution check box, if required.

     Note

     When local name resolution is enabled, users who are running the NCA can resolve names by using DNS servers that are configured on the DirectAccess client computer.

6. Click Finish.

Microsoft Remote Desktop Windows 10 Multiple Monitors

Configure the Remote Access server

Microsoft Remote Access Windows 10 Home

To deploy Remote Access, you need to configure the server that will act as the Remote Access server with the following:

1. Correct network adapters

2. A public URL for the Remote Access server to which client computers can connect (the ConnectTo address)

3. An IP-HTTPS certificate with a subject that matches the ConnectTo address

4. IPv6 settings

5. Client computer authentication

To configure the Remote Access server

1. In the middle pane of the Remote Access Management console, in the Step 2 Remote Access Server area, click Configure.

2. In the Remote Access Server Setup Wizard, on the Network Topology page, click the deployment topology that will be used in your organization. In Type the public name or IPv4 address used by clients to connect to the Remote Access server, enter the public name for the deployment (this name matches the subject name of the IP-HTTPS certificate, for example, edge1.contoso.com), and then click Next.

3. On the Network Adapters page, the wizard automatically detects:

   • Network adapters for the networks in your deployment. If the wizard does not detect the correct network adapters, manually select the correct adapters.

   • IP-HTTPS certificate. This is based on the public name for the deployment that you set during the previous step of the wizard. If the wizard does not detect the correct IP-HTTPS certificate, click Browse to manually select the correct certificate.

4. Click Next.

5. On the Prefix Configuration page (this page is only visible if IPv6 is detected in the internal network), the wizard automatically detects the IPv6 settings that are used on the internal network. If your deployment requires additional prefixes, configure the IPv6 prefixes for the internal network, an IPv6 prefix to assign to DirectAccess client computers, and an IPv6 prefix to assign to VPN client computers.

6. On the Authentication page:

   • For multisite and two-factor authentication deployments, you must use computer certificate authentication. Select the Use computer certificates check box to use computer certificate authentication and select the IPsec root certificate.

   • To enable client computers running Windows 7 to connect via DirectAccess, select the Enable Windows 7 client computers to connect via DirectAccess check box. You must also use computer certificate authentication in this type of deployment.

7. Click Finish.

Microsoft Remote Desktop Windows 10 Home

Configure the infrastructure servers

To configure the infrastructure servers in a Remote Access deployment, you must configure the following:

• Network location server

• DNS settings, including the DNS suffix search list

• Any management servers that are not automatically detected by Remote Access

To configure the infrastructure servers

1. In the middle pane of the Remote Access Management console, in the Step 3 Infrastructure Servers area, click Configure.

2. In the Infrastructure Server Setup Wizard, on the Network Location Server page, click the option that corresponds to the location of the network location server in your deployment.

   • If the network location server is on a remote web server, enter the URL, and then click Validate before you continue.

   • If the network location server is on the Remote Access server, click Browse to locate the relevant certificate, and then click Next.

3. On the DNS page, in the table, enter additional name suffixes that will be applied as Name Resolution Policy Table (NRPT) exemptions. Select a local name resolution option, and then click Next.

4. On the DNS Suffix Search List page, the Remote Access server automatically detects domain suffixes in the deployment. Use the Add and Remove buttons to create the list of domain suffixes that you want to use. To add a new domain suffix, in New Suffix, enter the suffix, and then click Add. Click Next.

5. On the Management page, add management servers that are not detected automatically, and then click Next. Remote Access automatically adds domain controllers and Configuration Manager servers.

6. Click Finish.

Configure application servers

Remote Access Settings Windows 10

In a full Remote Access deployment, configuring application servers is an optional task. In this scenario for remote management of DirectAccess clients, application servers are not utilized and this step is greyed out to indicate that it is not active. Click Finish to apply the configuration.

Configuration summary and alternate GPOs

Microsoft Remote Access Windows 10 Bios

When the Remote Access configuration is complete, the Remote Access Review is displayed. You can review all of the settings that you previously selected, including:

Microsoft Remote Access Windows 10 Home Edition

• GPO Settings

  The DirectAccess server GPO name and Client GPO name are listed. You can click the Change link next to the GPO Settings heading to modify the GPO settings.

• Remote Clients

  The DirectAccess client configuration is displayed, including the security group, connectivity verifiers, and DirectAccess connection name.

• Remote Access Server

  The DirectAccess configuration is displayed, including the public name and address, network adapter configuration, and certificate information.

• Infrastructure Servers

  This list includes the network location server URL, DNS suffixes that are used by DirectAccess clients, and management server information.

See also